Gorilla Playsets Landing - Page 71

1-1/4” Wood Screws
*DO NOT OVER TIGHTEN*
.Step 42: Slide
1: Lay Slide on deck with the lip extending onto/over the Deck Boards.
2: Secure the Slide to the Deck Boards with two 1-1/4” wood screws
* DO NOT OVER TIGHTEN*
3: Once slide is installed DO NOT lift the end of the slide or you may crack it at the
screw mounting points.
* DO NOT PICK UP SLIDE FROM BOTTOM ONCE
INSTALLED*
Page 71
®