GOSSEN Foto- und Lichtmesstechnik GmbH 19
2.9.1 Min. / Max. temperatures
When repeatedly pressing the measuring key, the minimum (Lo) and
maximum (Hi) temperature values will be indicated. The minimum
and maximum values indicated are those that have been measured
since the last cancellation operation.
The min. and max. temperature values stored in memory can be
cancelled by pressing the measuring key until the OK- signal sounds.
The temperature measurements are repeated automatically every two
minutes providing always the actual values. These min. and max.
temperature values will make it possible for you to check, whether your
films may have been exposed to excessive high temperatures and have
been damaged.
To Next Page
Loading...
