16
MIRRORS
This scooter is originally equipped with two mirrors in order to
guarantee full rear visibility to the driver.
However, they must be adjusted to the driver’s comfort before
each ride.
ADJUSTING THE MIRRORS
• Loosen the nut at the base of the mirror using a wrench
• Rotate the mirror until you can clearly see the area behind the
scooter
• Make sure you have a clear view of your surroundings
• Secure the mirror nuts tightly using a wrench
CARRYING LARGE LOADS
• Should you carry a large load or a big delivery box on the rear
rack, please ensure both mirrors allow you to see the area
behind you
• If needed, replace the original mirrors with longer/wider ones,
so that the load does not obstruct the rear-view
Adjust both mirrors before each ride.
Do not ride a scooter with damaged or
inproperly adjusted mirrors!
To Next Page
Loading...
