22
BRAKES
BRAKE OPERATION
• Gently and gradually press both brake levers in order to slow down
• Braking too rapidly may cause accidents
• When the road is wet, use preferably the rear brake to avoid front wheel skid
BRAKE INSPECTION
Brake systems must be inspected on regular basis in order to ensure its safe
operation:
• Check the brake fluid level on both brake pump reservoirs (see next page)
• Inspect the brake hoses for leaks
• Check if brake pad thickness is above 2.4 mm
• Check if brake discs thickness is above 2 mm
• Check free operation of brake levers. Adjust and lubricate when required.
The braking system is critical for the safety of the vehicle and the driver. For
personal safety, one should take good care of brake system condition. This
vehicle is fitted with two independent hydraulic disc brake systems for front
and rear wheel.
To Next Page
Loading...
