EasyManua.ls Logo

GOVECS FLEX - Tire Information and Maintenance; Tire Pressure Specifications; Tire Maintenance Guidelines

GOVECS FLEX
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
TIRES
The energy saving LED diodes do not need
regular maintenance.
In case of damaged LED lights, contact an authorised
service station for repairs.
This GOVECS scooter is equipped with tubeless tires:
Front tire: MITAS C02 2 ¾ -16 44P
Rear tire: MITAS C09 90/90-16 48P
TIRE PRESSURE
Front tire: 2,2 bar (220 kPa)
Rear tire: 2,5 bar (250 kPa)
Air pressure above or below these limits may cause excessive
tire wear and tear. It will have a negative impact on road grip,
vehicle range and safety.
TIRE MAINTENANCE
Before riding, check both tires for damage and eventual air
inflation pressure losses.
Tire inflation pressure should be checked weekly and after
long periods of inactivity.
Regularly check the tread depth. Replace tires when reaching
1mm or lower tread depth.
Tires must never be repaired. In the event of tire wear, tear,
chunk or any other sort of structural or tread damage, replace
them immediately with GOVECS approved tires.
Never use tires with different ETRTO dimensions, lower load index or lower speed symbol that those quoted above.
Never swap tires from front to rear and vice versa.
NEVER ride the scooter with tire pressure below 2,0 bar.
It can cause unstable manoeuvrability, lower road grip or
even an accident.
EN

Table of Contents

Related product manuals