18
BATTERY
Charge the battery to 100% before the first use of the scooter!
Remember, that in order to protect the battery from damage, the system will start power-derating
at 30% state of charge, which might slightly decrease vehicle's performance.
REMOVING THE BATTERY
You can remove the battery for storage or off-board charging.
• Switch off the scooter (press the start/stop button to
switch it off)
• Place the scooter on an even ground and unfold the side
stand or central stand. Release the seat lock and open it.
You can use the saddle keys, the remote control central
button, or the app to do so
• Open the saddle
• Unplug the battery connector (rotate its blue collar while
pulling it up)
ATTENTION: When unplugging the battery, do not pull on
the power cable (orange) but only unplug it by pulling the
connector
• Pull the battery release ring upwards while lifting the battery
up by its handle
INSTALLING THE BATTERY
• Open the saddle
• Carefully insert the battery into its place until the battery lock
is secure (characteristic „click” sound)
• Plug in the battery connector
• Close the saddle
To Next Page
Loading...
