- 2 - B.6.20.44-B
F22.060.02, issued on 01.98
CONTENTS – CONT’D
Page
TECHNICAL DESCRIPTION OF PRODUCT
DESCRIPTION OF THE RECIPROCATING PUMP 01
SUITABILITY, MATERIAL 02
TECHNICAL DATA 03
Key to designation, the module 03
DATA 04
Sound emission 05
Construction materials of wetted parts 05
Dimensions, connection threads, nominal diameters, attachment position 06
LIST OF REPAIR PARTS
REPAIR – RECIPROCATING PUMPS, REPAIR – ACCESSORIES (Sales catalogue extract)
Includes:
TEST CERTIFICATE (final inspection)
EC DECLARATION OF CONFORMITY
BRIEF USER INSTRUCTIONS (can be adhered to pump)
BRIEF OPERATING INSTRUCTIONS, WARNING SIGNS
CORRECT USE
The MERKUR 2000 reciprocating pumps are exclusively manufactured for the usual applications in
surfacing technology (to convey coatings or auxiliary agents or for spraying) or similar work.
Any other purpose above and beyond this is considered inappropriate use. We shall not be liable for
any damage or injury resulting from this; the user shall bear sole responsibility in such cases.
Correct use includes observing the operating, maintenance and inspection conditions and
regulations laid down by us.
The MERKUR 2000 reciprocating pumps should only be operated, maintained and serviced by
personnel familiar with, and trained to recognise its inherent dangers.
The relevant accident prevention regulations as well as safety and medical rules must be observed.
In case of unauthorised modifications of the appliance we cannot be held responsible for any
damages or injury resulting from such modifications.
The user is responsible for the correct installation of the equipment.