Graco 25 - Technical Data Summary; Operating Specifications; Approximate Weight

Technical Data
12 3A2099D
Technical Data
Maximum operating pressure 1000 psi (6.89 MPa, 68.9 bar)
Drive Speed 3 to 60 RPM
Number of drops per stroke
5/16 inch model: maximum 12 drops
5/16 inch model: minimum 1/4 drop
3/16 inch model: maximum 6 drops
3/16 inch model: minimum 1/6 drop
Cubic inch per stroke
5/16 inch model: maximum 0.0245
5/16 inch model: minimum 0.0005
3/16 inch model: maximum 0.0122
3/16 inch model: minimum 0.0003
CC per stroke
5/16 inch model: maximum 0.399
5/16 inch model: minimum 0.008
3/16 inch model: maximum 0.199
3/16 inch model: minimum 0.005
Drops per pint 14.115
Drops per cubic inch 490
Drops per cc 30
Strokes per minute
maximum 60
minimum 3
Viscosity*: SSU @ 100°F (37.78°C)
maximum 5000
minimum 80
Operating Temperature Range -20°F to 140°F (-28.89°C to 60°C)
Wetted Parts Fluoroelastomer, gray iron, carbon steel, alloy steel, stain-
less steel
Approximate Weight (empty)
Pump 2 lbs (0.9 kg)
Lubricator
4 Feed Reservoir and 4 pumps 15 lbs (7 kg)
8 Feed Reservoir and 8 pumps 29 lbs (13 kg)
12 Feed Reservoir and 12 pumps 44 lbs (20 kg)
16 Feed Reservoir and 16 pumps 59 lbs (27 kg)
20 Feed Reservoir and 20 pumps 73 lbs (33 kg)
 All displacements based on SAE30 oil: SSU @ 100°F (37.78°C) at room temperature.
* Approximate viscosities = SAE 10 = 200 SSU @ 100°F (37.78°C); 600 W = 2000 SSU @ 100°F (37.78°C).