To Next PageTo Next Page
Need help?Do you have a question about the Graco 25 and is the answer not in the manual?
General| Brand | Graco |
|---|---|
| Model | 25 |
| Category | Lubrication systems |
| Language | English |
Read all warnings and instructions in this manual. Save these instructions.
Details on various models, pump counts, dimensions, capacity, and drive options.
Specifies piston size, drops/stroke, cubic inch/stroke, CC/stroke, and Stokes/Minute.
Defines pump quantity based on pick letter and number of pumps.
Precautions to prevent fire and explosion when flammable fluids are present.
Risks of high-pressure fluid injection and required immediate treatment.
Consequences of misuse including fatigue, drugs, alcohol, and exceeding ratings.
Risks of pinch, cut, or amputation from moving parts and protective guards.
Dangers of rotating parts, loose clothing, jewelry, and hair during operation.
Mandatory PPE for operating or servicing, including eye, hearing, and respiratory protection.
Labels and descriptions of various components shown in the diagram.
Importance of grounding to reduce static and electric shock risks.
Steps for mounting the lubricator, filling the reservoir, and preparing for startup.
Initial startup priming, adjusting pump delivery, and feed rate control.
Using the hand crank for starting or momentarily increasing lubricant supply.
Procedure for filling the reservoir with clean, filtered fluid.
Steps to relieve fluid pressure before checking, cleaning, or servicing.
Periodic cleaning to eliminate contamination and steps for servicing.
Steps to remove a pump unit, including loosening screws and lifting the pump.
Instructions for installing a pump unit, connecting discharge lines, and tightening screws.
Troubleshooting for sight wells filling and overflowing into adjacent wells.
Diagnosing and resolving erratic pump performance due to air intake issues.
Identifying and fixing leaks in the gauge glass or gasket.
List of all parts with reference numbers, descriptions, and quantities.
Table showing blank plate quantities based on the number of pumps and code.
Maximum pressure, drive speed, drops per stroke, cubic inch/stroke, CC per stroke, and viscosity.
Weight of the pump and lubricator based on the number of feeds and reservoirs.
Detailed measurements including length, reservoir end lugs, and capacity in inches and mm.
Details Graco's warranty coverage, exclusions, and buyer's remedies.
Information on how to get the latest product details and place orders.
