Graco A Series - Operation And Parts List Manual

WLE
3A3438D
Operation - Parts List
Pole Spray Applicator
For applying water-based stucco base, finish coat materials, and Exterior Insulation and Finish Systems
(EIFS) using ToughTek
®
pumps and systems. For professional use only. Not approved for use in explosive
atmospheres or hazardous locations.
Model 25A217, Series C
Pole Spray Applicator with 35 mm Female Mortar Coupling
Model 25D852, Series A
Pole Spray Applicator with 1.5 in. Female Camlock
600 psi (4.13 MPa, 41.3 bar) Maximum Fluid Wor king Pressure
100 psi (0.69 MPa, 6.9 bar) Maximum Air Pressure
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this
manual. Save these instructions.