MAINTENANCE
1
WARNING
To reduce the risk of serious bodily injury alwaysfol-
page
2,
below, before checking, adjusting, clean-
low the
Pressure Relief Procedure Warnlng
on
ing
or
shutting down the Line Lazer.
CAUTlON
For detailed engine maintenance and specifica-
tions, refer to the separate HONDA engine manual.
DAILY:
Check the engine oil level and fill as necessary.
DAILY:
Check and
fill
the gas tank.
AFTER THE FIRST
20
HOURS OF OPERATION AND
EACH
100
HOURS THEREAFTER:
Change the oil.
WEEKLY:
Remove
the
alr
filter
cover and clean the
ele-
ment. In very dusty environments, check the filter daily.
Re
place the element as needed. Replacement elements can
be purchased from your local HONDA dealer.
WEEKLY
Check the
level
of theTSLin the displacement
pump packing nut. Fill the nut,
if
necessary. Keep TSL In
the nut
io
help lubricate the pump packings.
See
page
10.
WEEKLY:
,Use
a grease gun
to
grease the zerks
(32)
on
this unit.
The
grease purges pivot areas of paint buildup.
See
Fig
23-1.
SPARK PLUG:
Use
only a
(NGK)
BPGES
or
BPRGES
plug. Gap tne plug to
0.025
to
0.030
In.
(0.7
to
0.6
mm).
Always
use
a spark plug wrench.
Flg
23-1
308-105
23
To Next Page
Loading...
Need help?
General
