Graco Atlas User Manual

35
3 Forward
Facing
3-C Install Forward-Facing
with Vehicle Seat Belt
1. Store LATCH Strap
Attach LATCH hooks to the plastic rings as
shown.
2. Unhook Tether
Strap From
Storage Location
and Lay it in the
Seat
3. Place Car Seat Forward-Facing in
Back Seat of the Vehicle
Place forward-facing in vehicle seat. The
bottom of the seat should sit as flat as
possible on the vehicle seat.

Graco Atlas Specifications

General

Recline Positions	6
Cup Holders	2
Harness Type	5-point harness
Machine Washable	Yes
Rear-Facing Weight Limit	5-40 lbs
Forward-Facing Weight Limit	22-65 lbs
Headrest Positions	10
Warranty	1 year limited warranty
Installation	LATCH system and seat belt
Safety Features	Side-impact protection
Harness Positions	10
Type	Convertible Car Seat