EasyManuals Logo

Graco Atlas User Manual

Graco Atlas
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
7 Vehicle
Information
71
Sliding Latch Plate and ELR Retractor
A latchplate that slides freely on the belt
webbing and cannot, by itself, hold the belt
snug around a car seat.
With this retractor, you will need to use the
locking clip to lock the vehicle seat belt.
Call us at 1-800-345-4109 to order a
locking clip.
Route the vehicle seat belt through the
proper belt path and buckle it in. Pull the
vehicle seat belt tight. While pushing down
on seat, pinch the two straps together
behind the buckle tongue. Unbuckle the belt
without allowing it to slip.
Attach locking clip to lap and shoulder belts
as shown.
Rebuckle belt. Check that lap belt does not
move by pulling hard. If belt loosens or
lengthens, repeat procedure.
1” (2.5 cm)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco Atlas and is the answer not in the manual?

Graco Atlas Specifications

General IconGeneral
Recline Positions6
Cup Holders2
Harness Type5-point harness
Machine WashableYes
Rear-Facing Weight Limit5-40 lbs
Forward-Facing Weight Limit22-65 lbs
Headrest Positions10
Warranty1 year limited warranty
InstallationLATCH system and seat belt
Safety FeaturesSide-impact protection
Harness Positions10
TypeConvertible Car Seat

Related product manuals