Refer to seat pad care tag for washing
instructions.
Head Support Cover
Clean with a damp sponge using mild soap
and cool water. If needed, head support
cover may be removed for cleaning.
Remove harness and buckle strap. See
section 4-B.
To remove, raise the head support and undo
the 4 elastic loops.
Pull off head support cover as shown
Machine wash cover in cold water on
delicate cycle and drip-dry. DO NOT USE
BLEACH.
Reverse the steps to reattach the Head
Support Cover.
8-A Cleaning Seat Pad
To Next Page
Loading...
