Operation
3A8429B 15
Operation
Prime/Spray Valve
The Prime/Spray Valve uses a lever that is
flipped between the PRIME and SPRAY
position.
SPRAY Position
PRIME Position
Flush Storage Fluid
This sprayer arrives from the factory with a small
amount of test material in the system. It is
important that you flush this material from the
sprayer before using it for the first time. See
Cleaning Fluid Compatibility
, page 33 and
Quick Reference
, page 34 for additional
information.
1. Perform Pressure Relief Procedure,
page 14.
2. Make certain ON/OFF switch is OFF.
Power button is not illuminated when
OFF.
For Stand Models
a. Separate drain tube (smaller) from
suction tube (larger).
To Next Page
Loading...
