Graco GH 230 - GH300 Procontractor Series

Technical Data
66 334558D
All Models:
Basic Sprayer Wetted Parts:
Zinc and nickel-plated carbon steel, stainless steel, PTFE, acetal, chrome plating, leather, V-Maxt UHMWPE, stainless
steel, tungsten carbide, ceramic, nylon, aluminum
GH
™
300 ProContractor Series
US Metric
Maximum fluid working pressure 3300 psi 22.8 MPa, 228 bar
Hydraulic reservoir capacity 1.25 gallons 4.75 liters
Maximum hydraulic pressure 1855 psi 12.8 MPa,128 bar
Engine 270 cc (9.0 HP)
Maximum tip size 0.057
Maximum free-flow delivery 3.0 gpm 11.4 l/min
Hose connection 3/8 npsm (m)
Noise (dBa)
Maximum sound pressure 96 dBa
Maximum sound power 110 dBa
Inlet/Outlet Sizes
Fluid inlet size 1 5/16-12 UN-ZA
Fluid outlet size 3/8 npt (f)
Weight 222 lb. 100.7 kg
Width 25.3 in. 64.3 cm
Length 44.8 in. 113.8 cm
Height (Hose Reel Up) 38.5 in. 97.8 cm
Pump Height (Hose Reel Sideways)
33.0 in. 83.8 cm
OEM Kit
Paint/Hydraulic pressure ratio 1.78:1
Max cycle rate 145 cpm
User Supplied Input
Max hydraulic pressure 1855 psi 12.8 MPa,128 bar
Hydraulic flow required in free-flow 6.60 gpm 25.0 l/min
Unit Output
Max fluid Pressure 3300 psi 22.8 MPa, 228 bar
Max flow 3.0 gpm 11.4 l/min
Weight 35 lb. 15.9 kg
Width 8.94 in. 227 mm
Depth 5.38 in. 137 mm
Height
28.80 in. 732 mm