EasyManua.ls Logo

Graco G1 User Manual

Graco G1
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions
G1
Standard
Lubrication Pump
332316E
For dispensing of NLGI Grades #000 to #2 greases and oil with at least 40cSt. For
Professional Use Only.
Not approved for use in explosive atmospheres or hazardous locations.
Part Nos., page 3
5100 psi (35.1 MPa, 351.6 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
EN
3132066
conforms to AN-
SI/UL 73
certified to
CAN/CSA
Std. 22.2 No 68-09
Question and Answer IconNeed help?

Do you have a question about the Graco G1 and is the answer not in the manual?

Graco G1 Specifications

General IconGeneral
BrandGraco
ModelG1
CategoryWater Pump
LanguageEnglish

Summary

Important Safety Instructions

Grease Models

Oil Models

Warnings

Electric Shock Hazard

Grounding is essential to prevent electric shock from malfunction or breakdown.

Skin Injection Hazard

High-pressure fluid can pierce skin, causing serious injury requiring immediate surgical treatment.

Equipment Misuse Hazard

Misuse can cause death or serious injury; follow all safety and operating instructions.

Pressurized Equipment Hazard

Over-pressurization can result in equipment rupture and serious injury.

Plastic Parts Cleaning Solvent Hazard

Certain solvents can degrade plastic parts, causing failure and potential injury or damage.

Moving Parts Hazard

Moving parts can pinch or amputate body parts; keep clear and use guards.

Personal Protective Equipment

Wear appropriate PPE for protection against serious injury during operation or servicing.

Installation

Grounding

Proper grounding reduces the risk of electric shock by providing an escape path for current.

System Configuration and Wiring

Details proper grounding conductor installation and wiring requirements for safe operation.

Choosing an Installation Location

Guidance on selecting a suitable location that supports weight and connections.

Wiring and Installation Diagrams

Setup

Pressure Relief

Explains the procedure for relieving pressure to prevent injury before servicing or cleaning.

Loading Grease

Instructions for loading grease into the reservoir for optimal performance, including models with/without follower plates.

Filling Oil Unit

Guidance on filling the oil reservoir with appropriate oil and ensuring proper viscosity.

Connecting to Auxiliary Fittings

Provides guidelines for connecting auxiliary fittings without causing housing damage.

Pressure Relief Valves

Stresses the need for a pressure relief valve rated for the system's working pressure.

No Controller Operation

Troubleshooting

Maintenance

Parts Drawing: 2 Liter Models

Parts Drawing: 4 and 8 Liter Models

Parts

Pressure Relief Valves

Technical Data

Mounting Pattern

Graco Standard Warranty

Related product manuals