Pressure Relief Procedure
332156E 7
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever
you see this symbol.
1. Set pump valve OFF.
2. Turn engine OFF.
3. Loosen Lock Ring. Turn pressure control to lowest
setting. Trigger gun into pail to relieve pressure.
4. Rotate handle counter-clockwise to open prime
valve.
Grounding
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from pressurized fluid, such as skin injection,
splashing fluid and moving parts, follow the Pressure
Relief Procedure when you stop spraying and before
cleaning, checking, or servicing the equipment.
ti7108a
ti7111b
Ground sprayer with grounding clamp to earth ground.
ti7120b
ti21061a
To Next Page
Loading...
