Graco GM 3500 - Page 26

NOTE Refer to Fig 26-1. 3.
1. Remove the engine from the cart. See page 25.
2. Loosen the four setscrews (12) holding the field (6) to
4.
the clutch housing (2), and pull out the field. 5.
Pullthe plastic caps (B) off the wire screws (33) in both
places
on the field. Loosen the screws and release
the
wires (29).
Pull
off the field.
Skip aheadio Reassembly, page 28, Step 4.
Fig 26-1