Graco GrindLazer 270 User Manual

Operation
10 3A0101F
Stop Cutting Material
1. Push down on handle bars until drum is locked into
UP position.
2. Slide Engine Throttle Lever (A) to low setting.
3. Turn Engine Power Switch (B) OFF.
Clean Up
Clean the entire exterior of the machine after it has
cooled at the end of each work day. Check for worn or
damaged parts and perform any required Maintenance,
page 12.
ti14758a
ti6482a
ti15176a
270 & 390 Models
480/630 Models
ti15177a

Graco GrindLazer 270 Specifications

General

Brand	Graco
Model	GrindLazer 270
Category	Construction Equipment
Language	English