Graco HFR - Page 99

Appendix G - Communications Gateway Module Installation Kit
3A2797ZAA 99
Screen 1
This screen enables the user to set the IP address,
DHCP settings, subnet mask, gateway, and DNS
information. See F
IG. 35.
Screen 2
This screen displays the hardware revision, system
serial number, and data map identification information.
See F
IG. 36.
DeviceNet FieldBus Screen
These screens show only if you have a DeviceNet
FieldBus CGM installed.
This screen enables the user to set the device address,
and baud rate, and to view the hardware revision,
system serial number, and data map identification
information. See F
IG. 37.
PROFIBUS FieldBus Screen
These screens shown only if you have a PROFIBUS
FieldBus CGM installed.
Screen 1
This screen enables the user to set the IP address,
DCHP settings, subnet mask, gateway, and DNS
information. See F
IG. 38.
FIG. 35 EitherNet/IP Fieldbus Screen 1
FIG. 36 EitherNet FieldBus Screen 2
FIG. 37 DeviceNet FieldBus Screen
FIG. 38 PROFIBUS FieldBus Screen 1