How to Spray
16 3A4980B
How to Spray
Take a few moments prior to spraying and
review these tips to ensure your spraying
project is a success.
Adjust Spray Pattern
Set air cap to position for spray pattern
desired.
Adjust Flow and Pattern Size
Edge II
Fluid/Air Control:
Flow and pattern size is determined by
adjustment to the Fluid/Air control knob. Set
knob to OFF. Increase flow until desired finish
is attained.
Edge II Plus
Flow and pattern size is determined by
adjustment to the Fluid, Air and Pattern Size
controls.
The turbine motor generates sparks.
These sparks can ignite flammable fumes.
• Keep sprayer in a well ventilated area.
• Keep sprayer at least 20 feet (6m) from
spray area. Use additional hose if
necessary.
ti30977a
To Next Page
Loading...
Need help?
General
