Graco Reactor 2 H-XP2 User Manual

Repair-Parts
Reactor® 2 Hydraulic Proportioning
Systems
334946A
EN
Hydraulic, Heated, Plural Component Proportioner for spraying polyurethane foam and polyurea
coatings. Not for outdoor use. For professional use only. Not approved for use in explosive atmospheres
or hazardous locations.
Important Safety Instructions
Read all warnings and instructions in this manual. Save these
instructions.
For model information, see page 10.
PROVEN QUALITY. LEADING TECHNOLOGY.

Graco Reactor 2 H-XP2 Specifications

General

Power Source	Electric
Heater	Yes
Max Pressure	3300 PSI
Fluid Type	Paints, coatings, and other sprayable materials
Hose Length	50 ft
Maximum Working Pressure	3300 PSI
Maximum Flow Rate	0.8 GPM (3.0 LPM)
Motor Power	2 HP