Graco Reactor H-40 Series - User Manual

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001
312062 rev. A
Operation
Hydraulic, Heated, Plural Component Proportioner
For spraying polyurethane foam and polyurea coatings.
Not for use in explosive atmospheres.
See page 3 for model information, including
maximum working pressure and approvals.
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
T9830a
Model H-40 Shown

Graco Reactor H-40 Series Specifications

General

Brand	Graco
Model	Reactor H-40 Series
Category	Paint Sprayer
Language	English

Summary

Operation Safety Guidelines

General Safety Warnings

Important safety instructions for setup, use, grounding, maintenance, and repair of the equipment.

Key Safety Warnings

Electrical, Toxic, and PPE Hazards

Covers electric shock, toxic fluids/fumes, and required personal protective equipment.

Operational and Fire Hazards

Fire, Misuse, and Physical Hazards

Details risks from fire, explosion, misuse, moving parts, and burns.

Isocyanate Handling and Material Safety

Isocyanate Moisture Sensitivity & Separation

Temperature Controls and Indicators

Temperature Operation and Circuit Breakers

Motor Controls and Indicators

Spray Adjustments

General Setup Procedures

Electrical Cord Connection

Feed Pump & Pressure Relief Connections

System Grounding & Lubrication Setup

Startup: Loading Fluid

Startup: Setting Temperatures

Startup: Setting Pressure

Spraying Operation

Spraying Preparation

Spraying Execution & Testing

Shutdown Procedure

Pressure Relief Procedure

Circulation Through Reactor

Diagnostic Codes

Maintenance