Internal Models (HM25c)
56 334784G
Cables
Repair Parts
Part Description Use with Image
24X449 KIT, cable, M12, 4-pin,
F-L, 5 m
Triggers with M12 connection (12 mm nut)
Run-up controller
24X453 KIT, cable, M12, 4-pin,
F-L, 10 m
24X454 KIT, cable, M12, 8-pin,
F-L, 5 m
Encoder
24X455 KIT, cable, M12,8-pin, F-L,
10 m
24X456 KIT, cable, M8, 3-pin, F-L,
5 m
Mini solenoid valve (i.e. GM-100)
24X457 KIT, cable, M8, 3-pin, F-L,
10 m
24X458 KIT, cable, M8, 4-pin, F-L,
5 m
Triggers with M8 connection (8 mm nut)
24X459 KIT, cable, M8, 4-pin, F-L,
10 m
17F443 KIT, cordset, solenoid, 5 m Standard solenoid valve (i.e. GS-35)
17F444 KIT, cordset, solenoid, 10
m
24R710 KIT, cable, CAN, 5 m Remote mounting of pattern controller
enclosure or ADM
24R711 KIT, cable, CAN 15 m
24R712 KIT, cable, CAN 50 m
128692 CABLE, NDSN encoder Connects Nordson encoder to the pattern
controller
WLD
Part Description Use with Image
17E019 KIT, pattern control board Internal models (HM25c)
and external models
24X521 KIT, internal pattern control
board
Internal models (HM25 and HM50)
To Next Page
