Graco LineLazer IV 5900 - System Power-Up Sequence

Cleanup
311017A 31
4 Remove siphon tube set
from paint and place in
flushing fluid. Use water
for water-base paint and
mineral spirits for
oil-base paint.
5 Turn engine ON and
start engine.
Set pump switch ON.
6 Turn prime valve
horizontal.
7 Hold gun against paint pail.
Disengage gun trigger safety. Turn
pressure control up until motor
begins to drive pump. Trigger gun
until flushing fluid appears.
PAINT
FLUSH
ti3310a
21
WLD
2))
21
WLD
WLD
PAINT
ti3417a
WLD