Graco LineLazer IV 5900 - Page 32

Cleanup
32 311017A
8 Move gun to flushing
pail, hold gun against
pail, trigger gun to
thoroughly flush
system. Release
trigger and engage
trigger safety.
9 Turn prime valve down
and allow flushing fluid to
circulate for 1 to 2 minutes
to clean drain tube.
10 Raise siphon tube above
flushing fluid and run
sprayer for 15 to 30
seconds to drain fluid.
11 Turn pump switch OFF.
Turn engine OFF.
FLUSH
TI3377A
WLD
0,1
PAINT
FLUSH
TI3383A
6(&
WLD
2))
21
2))
WLD