Graco LineLazer IV 5900 - Auto-Layout System Calibration

Cleanup
311017A 33
Caution: If flushing with
water, flush again with min-
eral spirits, or Pump Armor to
leave a protective coating to
prevent freezing or corrosion.
12 Make sure plastic center
tube is tightened
securely. Install filter
bowl and filter. Hand
tighten filter cap.
13 Wipe sprayer, hose and
gun with a rag soaked in
water or mineral spirits.
14 Clean tip, guard and
gasket with a soft bristle
brush to prevent part
failure due to dried
materials. Assemble
parts and attach loosely
onto gun.
Pump Armor
ti2895a
WLD
TI3388A
FLUSH
TI3390A