Gun Placement
3A3388A Operation 19
Installation
1. Install vertical gun mount onto gun bar.
NOTE: Make sure all hoses, cables, and wires are
properly routed through brackets.
Trigger Sensor Adjustment
1. Start striper engine. Engage trigger. Spray icon
should appear simultaneously with start of fluid
spray.
No fluid spray
2. Turn screw in handle clockwise if spray icon
appears before fluid spray starts.
No spray icon
3. Turn screw in handle counterclockwise if fluid spray
starts before spray icon appears.
4. Continue adjusting screw in handle until timing of
spray icon and fluid spray are synchronized. Adjust-
ment of the gun cables might be necessary.
30.8
0.0
9
1490
mph
0
6
˝
mph
0
6
˝
ti27940a
30.8
0.0
9
1490
Standard Series
HP Auto Series
ti27802a
ti27803a
To Next Page
Loading...
