Graco LineLazer v 3900 - Dot Laser (if Applicable)

Gun Placement
22 3A3388A Operation
Dot Laser (if applicable)
1. Remove battery cover.
2. Attach ON/OFF switch to desired location on the
handle bar.
3. Attach laser to desired location on the gun arm.
4. Route wires from the switch to the battery and con-
nect to the (+) and (-) terminals.
5. Connect the switch leads to the wire harness.
6. Reattach battery cover.
7. Turn on laser and position dot underneath gun
head.
LASER LIGHT HAZARD. Avoid direct eye contact.
ti27886a
ti27815a
ti27816a
ti27818a
ti27887a
ti27888a
ti27817a