LineLazer V LiveLook Display
36 3A3388A Operation
3. Press to select Setup/Information.
4. Press for Calibration. Set TRAVEL DIST to 25 ft
(7.6m) or longer. Longer distances ensure better
accuracy, depending on conditions.
5. Turn on laser and align laser dot with 1 foot
(30.5cm) on steel tape.
6. Press and release gun trigger control to start cali-
bration.
7. Move striper forward. Keep laser dot on steel tape.
8. Stop when laser aligns with 26-ft (8m) or distance
entered on steel tape (25-ft./7.6m distance).
9. Press and release gun trigger control to complete
calibration.
• Calibration is not complete when the exclamation
symbol is displayed.
• Calibration is finished when the check mark symbol
is displayed.
10. Calibration is now complete.
To Next Page
Loading...
