Graco LP 555 - Page 22

Operation
22 3A4203B
3. Sprayer model number is displayed
followed by Data Point 1 which is the unit
power on time in hours.
4. Press display button again to display
Data Point 2. Motor
run time in hours is
displayed.
5. Press display button again to display
Data Point 3. This will be the last error
code.
6. To erase last error code, press and hold
display button.
7. Press display button again to display
Data Point 4. The software revision is
displayed.
8. Press display button again to return to
Data Point 1.
9. Turn ON/OFF switch to OFF position to
exit Stored Data.
ti29544a
ti24586a