LTS 15 and LTS 17 ONLY: Use water-based or min-
eral spirit-type materials only. Do not use materials
having flash points lower than 100° F (38° C). This
includes, but is not limited to, acetone, xylene, toluene,
or naptha. For more information about your material,
request MSDS from distributor or retailer.
Models 16W120, 16W121, 16W122
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this manual.
Save these instructions.
See page 3 for model series information including
dispense rate, recommended hose length, guns, and
maximum working pressure.
To Next Page
General
