Component Identification
312796S 7
Grounding
See FIG. 2. Verify that the ground screw (GS) is attached
and tightened securely to the air motor. Connect the
other end of the ground wire (U) to a true earth ground.
Accessories
Bleed-type master air valve
• Required in your system to relieve air trapped
between it and the air motor when the valve is
closed.
• Be sure the valve is easily accessible from the pump
and located downstream from the air regulator.
Air regulator
Adjusts air pressure to the motor and fluid outlet pres-
sure of pump. Locate it close to the pump. Install a
gauge to read air pressure.
Air filter
Removes harmful dirt and moisture from compressed
air supply.
FIG. 2: Ground wire
Trapped air can cause the pump to cycle unexpectedly,
which could result in serious injury from splashing or
moving parts.
To Next Page
Loading...
