Accessories
Must be purchased separately
.
Grounding Clamp 103–538
Ground W
ire 208–950
12 ga (1.5 mm
),
25 ft (7.6 m) long
Bleed-T
ype Master Air V
alve (Required)
300 psi (21 bar
, 2.1 MPa) MAXIMUM WORKING
PRESSURE
Relieves air trapped in the air line between the pump
air inlet and this valve when closed.
107–141
3/4 npt(m) inlet x 3/4 npt(f) outlet
107–142
1/2 npt(m) inlet x 1/2 npt(f) outlet
Air Line Filter
106–148
3/8” npt inlet and outlet
106–149
1/2” npt inlet and outlet
250 psi (17.4 bar
, 1.74 MPa) MAXIMUM WORKING
PRESSURE
Padded Pliers 207–579
Use
to grip trip
rod during air motor servicing, to prevent
damage
to rod.
V
alve Stem Gauge 171–818
Use to check transfer valve clearance during air motor
servicing.
Muffler
Kit 214–873
Replaces existing motor muffler to reduce noise and oil
mist
emissions. Includes separate manual 307–361.
To Next Page
Loading...
