EasyManua.ls Logo

Graco Pro210ES User Manual

Graco Pro210ES
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
334659G
EN
Operation, Parts
210 ES Electric
Airless Sprayers
For professional use only.
Not approved for use in explosive atmospheres or hazardous locations.
For portable airless spraying of architectural paints and coatings.
Models: 17D163, 17C305
3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual and
related manuals. Be familiar with the controls and the
proper usage of the equipment. Save these instructions.
Related Manuals
Gun – 312830 (SG3) Pump – 334599
ti25464a
17D163 17C305
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
Scan QR code or click on link for
operational video.
http://magnum.graco.com/pro210es
Question and Answer IconNeed help?

Do you have a question about the Graco Pro210ES and is the answer not in the manual?

Graco Pro210ES Specifications

General IconGeneral
Maximum Tip Size0.021 inches
Maximum Pressure3000 PSI
Maximum Flow Rate0.47 GPM
Hose Length50 feet
TypeAirless Paint Sprayer
Power SourceElectric
Voltage120 V

Summary

Warnings

Grounding and Extension Cord Safety

Ensures safe operation by preventing electric shock and static discharge through proper grounding and extension cord use.

Fire and Explosion Hazard Precautions

Precautions against igniting flammable fumes or materials with sparks, static electricity, or open flames.

Skin Injection and Equipment Misuse Hazards

Details risks of high-pressure injection injury, general misuse, and necessary safety precautions.

Electrical, Material, and Toxic Hazards

Covers electrical shock, material incompatibility, moving parts, toxic fumes, and PPE requirements.

Pressure Relief Procedure

Safe Pressure Release Steps

Step-by-step guide for safely relieving pressure in the sprayer before maintenance or cleaning.

Setup

Flushing and Preparation for Use

Detailed steps for flushing the sprayer with fluid and preparing it for startup and spraying.

Startup

Initial Motor Start and Paint Circulation

Steps to start the motor, circulate paint through the sprayer, and adjust pressure.

Leak Inspection and Tip Installation

Procedure for inspecting for leaks and installing the tip assembly after initial startup.

Operation

Spray Tip Installation and Adjustment

Guide for installing spray tips and adjusting pressure for optimal spray pattern and edge control.

Maintenance

Troubleshooting

Wiring Diagram

Related product manuals