Graco ProControl 1KE Plus - Hazardous Locations

Installation
Hazardous Hazardous
Hazardous
Locations Locations
Locations
Donotsubstituteormodifysystemcomponents
asthismayimpairintrinsicsafety.Forinstallation,
maintenance,oroperationinstructions,read
instructionmanuals.Donotinstallequipment
approvedonlyfornon-hazardouslocationsina
hazardouslocation.Seetheidenti󰘰cationlabelfor
theintrinsicsafetyratingforyourequipment.
Intrinsicallysafe(IS)equipmentshouldnotbeused
withapowersupplythathasnobarrier.Donot
moveunitsfromanon-ISsetuptoanISsetup.IS
equipmentthathasbeenusedwithanon-ISpower
supplymustnotbereturnedtoahazardouslocation.
Alwaysuseanintrinsicallysafepowersupplywith
ISequipment.
•InstallationshouldbeinaccordancewithANSI/ISA
RP12.06.01,“InstallationofIntrinsicallySafe
SystemsforHazardous(Classi󰘰ed)Locations,”
andtheNationalElectricalCode®(ANSI/NFPA
70).
•InstallationinCanadashouldbeinaccordance
withtheCanadianElectricalCode,CSAC22.1,
Part1,AppendixF.
•ForATEX,installperEN60079-14andapplicable
localandnationalcodes.
•Multipleearthingofcomponentsisallowedonly
ifahighintegrityequipotentialsystemisrealized
betweenthepointsofbonding.
•Donotremoveanycoveruntilpowerhasbeen
removed.
•InstallADCMaccordingtoControlDrawingNumber
16M169.SeeAppendixAinManual332013.
203A6948A