Setup
3A9301C 13
Belt Setup
1. Install Belt Holster onto Belt located per
the user’s preference (left side, right
side, or back side).
2. Attach the Belt on waist and tighten until
snug. Close Belt Latch.
3. Attach sprayer to Belt Holster in
orientation of the user’s preference
(Hose facing forward or backward).
4. Spray Gun will hook on the outside of
the sprayer as shown for hands-free
mobility.
5. To remove sprayer from Belt, press the
Holster Release Clip and pull up on the
sprayer.
NOTE: Extra Belt length can be cut to
desired size with scissors.
NOTICE
Never pull the sprayer around by the Hose.
Doing so can disconnect the wire
connections in the sprayer or Spray Gun.
To Next Page
Loading...
