Spraying
18 3A9301C
Clear Tip Clogs
1. Release Trigger. Engage Trigger Lock.
Rotate Spray Tip to UNCLOG position.
Disengage Trigger Lock. Trigger Spray
Gun into waste pail to clear clog.
2. Engage Trigger Lock. Return Spray Tip
to SPRAY position. Disengage Trigger
Lock and continue spraying.
NOTE: If Spray Tip is still clogged, repeat
steps 1 and 2 with Flow Control set to 10. If
still plugged you may have to replace the
Spray Tip.
To avoid serious injury from skin injection,
do not put your hand in front of the Spray
Tip or Spray Tip Guard.
To Next Page
Loading...
