Reference
26 3A9301C
Reference
Cleaning Fluid
Compatibility
Oil-Based or Flammable or
Water-Based Materials
•
When spraying water-based materials,
flush the system thoroughly with water.
• When spraying oil-based or flammable
materials, flush the system thoroughly
with mineral spirits or compatible,
flushing solvent.
• To spray water-based materials after
spraying oil-based or flammable
materials, flush the system thoroughly
with water first. The water flowing out
of drain tube should be clear and sol-
vent-free before you begin spraying
the water-based material.
• To spray oil-based or flammable
materials after spraying water-based
materials, flush the system thoroughly
with mineral spirits or a compatible
flushing solvent first. The solvent flow-
ing out of the drain tube should not
contain any water. When flushing with
solvents always follow Cleaning
Sprayer, page 22.
• To avoid fluid splashing back on your
skin or into your eyes, always aim gun
at inside wall of pail.
To Next Page
Loading...
