Models
Reactor 2 H-XP2 and H-XP2 Elite
H-XP2 Model H-XP2 Elite Model
Model
15 kW 15kW
Proportioner
★ 17H062 17H162
Maximum Fluid Working
Pressure psi (MPa, bar)
3500 (24.1, 241) 3500 (24.1, 241)
Approximate Output per Cycle
(A+B) gal. (liter)
0.042 (0.16) 0.042 (0.16)
Max Flow Rate lb/min (kg/min)
1.5 (5.7) 1.5 (5.7)
Total System Load † (Watts)
23,260 23,260
Configurable Voltage Phase
230 1Ø 230 3Ø∆ 400 3Ø Y 230 1Ø 230 3Ø∆ 400 3Ø Y
Full Load Peak Current*
100 59 35 100 59 35
Fusion
®
AP Package
(Gun P art No.)
APH062
(246101)
AHH062
(246101)
APH162
(246101)
AHH162
(246101)
Probler P2 Package
(Gun P art No.)
P2H062
(GCP2R1)
PHH062
(246101)
P2H162
(GCP2R1)
PHH162
(246101)
Heated Hose
50 ft (15 m)
24K241
(scuff guard)
24Y241
(Xtreme-wrap)
Heated Whip Hose
10 ft (3 m)
246055 246055
Graco Insite
✓
Fluid Inlet Sensors (2)
✓
*
Full load amps with all devices operating at
max imum capabilities. Fuse requirements
at various flow rates and mix chamber sizes
may be less.
Total system watts used by system, based on
max imum heated hose length for each unit.
• H–XP2 series: 310 ft (94.5 m) maximum
heated hose length, including whip hose.
★
See Approvals.
Packages include gun, heated hose, and
whip hose. Elite packa ges also incl ude
Graco InSite and fluid inlet sensors. All Elite
hose and gun system packages include
Xtreme-Wrap™ 50 ft (15 m) heated hose.
For part numbers, see Accessories, page 16.
Voltage Configurations Key
Ø
PHASE
∆
DELTA
YWYE
14
334946A
To Next Page
Loading...
