Graco Reactor A-25

Technical Data
309812D 41
Loctite
®
is a registered trademark of the Loctite Corporation.
Fluid Inlets Models A-25, A-XP2, A-XP2 2:1, and H-XP3: 3/4 npt(f)
Models A-50 and H-50: 1” npt(f)
Model HT heat packages: 1/2 npt(f) on heater inlet blocks
Fluid Outlets Component A (ISO): #8 JIC (3/4-16 unf), with #5 JIC adapter
Component B (RES): #10 JIC (7/8-14 unf), with #6 JIC adapter
Fluid Circulation Ports 1/4 npsm(m), with plastic tubing, 250 psi (1.75 MPa, 17.5 bar) maximum
Maximum Fluid Temper-
ature
190°F (88°C)
Maximum Output (10
weight oil at ambient
temperature)
Model A-25: 25 lb/min (11 kg/min) at 75 cycles/min
Models A-50 and H-50: 50 lb/min (22.5 kg/min) at 45 cycles/min
Model A-XP2: 1.5 gpm (5.7 liter/min) at 78 cycles/min
Model A-XP2 2:1: 1.5 gpm (5.7 liter/min) at 60 cycles/min
Model H-XP3: 3.6 gpm (13.7 liter/min) at 50 cycles/min
Output per Cycle (A and
B)
Model A-25: 0.031 gal. (0.117 liter)
Models A-50 and H-50: 0.114 gal. (0.431 liter)
Model A-XP2: 0.0193 gal. (.073 liter)
Model A-XP2 2:1: 0.02895 gal. (0.110 liter)
Model H-XP3: 0.072 gal. (0.274 liter)
Line Voltage Require-
ment
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz
380V 3 phase units: 338-457 Vac, 50/60 Hz
Amperage Requirement See T
ABLE 1, page 17.
Heater Power
(A and B heaters, no
hose)
Model HT-6.0: 6000 Watts
Models A-25, A-XP2, A-XP2 2:1, and HT-10.2: 10200 Watts
Models A-50, H-50, H-XP3, and HT-15.3: 15300 Watts
Sound Power, per ISO
9614-2
Model A-25: 94.7 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-50: 86.5 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-XP2: 94.7 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 15 cpm
Model A-XP2 2:1: 94.7 dB(A) at 1370 psi (9.4 MPa, 94 bar), 0.75 gpm (2.8 lpm), 15 cpm
Model H-50: 88 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 20 cpm
Model H-XP3: 103 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 25 cpm
Sound Pressure, 1 m
from equipment
Model A-25: 81 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-50: 78.8 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 15 cpm
Model A-XP2: 81 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 15 cpm
Model A-XP2 2:1: 81 dB(A) at 1370 psi (9.4 MPa, 94 bar), 0.75 gpm (2.8 lpm), 15 cpm
Model H-50: 78 dB(A) at 1000 psi (7 MPa, 70 bar), 3.0 gpm (11.4 lpm), 20 cpm
Model H-XP3: 88 dB(A) at 2000 psi (14 MPa, 140 bar), 0.5 gpm (1.9 lpm), 25 cpm
Wetted Parts Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, chemically
resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Category Data