System Priming
9
Alternate Method - Using Prime Switch (P):
(If air flow with material through gun is not desired)
1 Turn sprayer main power (A)
ON.
2 Turn fluid flow regulator (K) up
as necessary
3 Close gun air valve (aa). 4 Depress and hold prime switch
(P) to start and stop flow. Aim
gun into hopper (C) and
squeeze gun trigger.
123
123
CAUTION
English Français Dutch
Excessive or prolonged use of
Prime Switch (P) can cause
material to back up into gun air
passages, causing blockage
and/or gun air valve failure.
A
ti4653a
K
ti4655a
ti4005a
aa
ti4656a
ti4364a
P
To Next Page
Loading...
