System Priming
8
System Priming
Preferred Method:
English Français Dutch
FUNCTION
The RTX 1500 Electric Texture
Sprayer is equipped with an
automatic material pressure and
flow device. When the operator
releases the gun trigger, the pump
pressure and flow, stops. When the
operator squeezes the gun trigger,
pump pressure and flow starts.
Triggering system will deliver a ‘Soft
Start’ of material flow
.
How this works.
The system
recognizes atomization air flow at
the gun by means of an air flow
sensor located inside unit
.
1 Turn sprayer main power (A)
ON.
2 Open gun air valve (aa)
slightly, allowing a small
amount of air to flow with
material through gun. This
automatically delivers material
pressure and flow.
3 Aim gun (M) into hopper (C)
and squeeze gun trigger.
123
123
A
ti4653a
ti4000a
aa
ti4654a
To Next Page
Loading...
