Preparation
16
Wetting Hose
WARNING
Read warnings, page 4.
Wet inside of hose before each
use to flush out sediment and
prevent texture material from
packing out hose.
1 Pour one (1) gallon (3.8 liters)
of clean water into hopper.
2 Open gun air valve (aa). Follow
System Priming, page 8.
3 Turn sprayer ON (A). Aim gun
(M) into hopper (C) and trigger
gun to circulate water for a few
minutes to wet inside of mate-
rial hose.
123
123
WATER
ti4505a
ti4000a
aa
ti4654a
To Next Page
Loading...
