Graco SaniForce 4150 - Typical Installation

Installation
3A5999E 11
Typical Installation
FIG. 2: Typical Floor-Mount Installation
Key:
A Master air valve (for accessories)
B Air regulator (required, not
supplied)
C Bleed-type master air valve (for
pump) (required, not supplied)
D Air supply line
E Air line coupler
F 1/2 npt (f) pump air inlet
G Flexible fluid outlet line
H Flexible fluid suction line
J Fluid shutoff valve (required, not
supplied)
K Fluid drain valve (required, not
supplied)
L Ground wire (required, not
supplied; see page 8 for
installation instructions)
R Air line filter
S Air pressure gauge (required, not
supplied)