Graco SaniForce - Kits

Kits
Complete Pump
Model 25M912, 25M912C31
Ref. Part
Description
Qty.
1
24G785 MOTOR, SaniForce; 3.5 in; see manual 3A1211
1
2
DISPLACEMENT PUMP:
1
25M906 EN 10204, type 2.1
25M906C31
EN 10204, type 3.1
3 16A938
COUPLER
1
4 16A947
TIE ROD, 7 in. (178 mm) between shoulders
3
5
102216 NUT, lock, 5/8-11, sst 3
6
16G464 SHIELD, upper; includes grommets (Ref. 21)
1
7
16G465 SHIELD, lower; includes fasteners (Ref. 8) and grommets (Ref. 21)
1
8 118134
SCREW, cap; M8 x 1.25, sst
4
10
24G862 FITTING, air inlet, 1/2 npt, includes Ref. 23
1
11
16C946 FITTING, 3/4 npt
1
12 165053
O-RING, PTFE
1
13
16C306
NUT, hand 1
15▲ 17W547 LABEL, warning, not shown 1
21
—
GROMMET;
see Kits
6
22
16G084 FITTING, air inlet, 1/2 npt
1
23 166702
O-RING, air inlet, buna-n, included with Ref. 10
1
▲ Replacement Danger and Warning labels, tags, and cards are available at no cost.
‡ These parts are not used with Model 25D363.
Kits
Gromm
et Kit 16G628
Ref.
Part Description
Qty.
21a*
—
GROM
MET, air motor
pist
on rod
1
21b
—
GROMMET, air fitting
2
21c
—
GROMMET, tie rod
3
* Order Kit 16H925 for qty. 3 of the piston rod grommet.
8 3A5564A