D
Dr. William VaughnSep 2, 2025
What to do if the fluid nozzle on my Graco Paint Sprayer is too loose?
- MMichelle HicksSep 2, 2025
If the fluid nozzle on your Graco Paint Sprayer is too loose, tighten it.
To Next PageTo Next PageWhat to do if the fluid nozzle on my Graco Paint Sprayer is too loose?
If the fluid nozzle on your Graco Paint Sprayer is too loose, tighten it.
What to do if my Graco Sharpe Finex FX2000 Paint Sprayer cup is almost empty?
If the cup of your Graco Paint Sprayer is almost empty, fill it.
What to do if my Graco Paint Sprayer cup is empty?
If the cup of your Graco Paint Sprayer is empty, fill it.
What to do if my Graco Sharpe Finex FX2000 Paint Sprayer's fluid is too thick?
If the fluid you're using with your Graco Paint Sprayer is too thick for gravity feed, thin the material.
What to do if my Graco Paint Sprayer's atomization air pressure is too high?
If the atomization air pressure is set too high on your Graco Paint Sprayer, reduce the air pressure.
What to do if the needle on my Graco Sharpe Finex FX2000 feels sluggish?
If the needle on your Graco Paint Sprayer feels sluggish, you should clean and lubricate it.
Why is my Graco Paint Sprayer producing a thick, dimpled finish?
A thick, dimpled finish (resembling orange peel) from your Graco Paint Sprayer is caused by holding the gun too close to the surface. Hold the gun about 6-8 inches (150-200 mm) from the surface.
General| Material | Aluminum |
|---|---|
| Fluid Tip Size | 1.4 mm |
| Air Pressure | 29 PSI |
| Fluid Delivery | 0.38 GPM |
| Flow Rate | 0.38 GPM |
| Tip Size | 1.4 mm |
Flammable fumes in work area can ignite or explode. Prevent by ventilation, no ignition sources, grounding.
Misuse can cause death or serious injury. Follow safe operating, maintenance, and usage guidelines.
Fluid can splash and cause injury. Relieve pressure before servicing and check connections.
Toxic fluids/fumes can cause injury or death. Read MSDS, store properly, wear gloves.
