Graco Smart Seat - Adjusting Head Support in Booster Mode

5858
19.4 Adjusting Head Support in
Booster Mode
When using in booster mode always use one
of the top 4 height positions A.
tBEFORE adjusting the head support height,
have your child lean forward slightly.
t4RVFF[FUIFSFEBEKVTUNFOUIBOEMF
B on
top of seat and pull head support up until it
snaps into one of the 4 height positions.
t5PMPXFSTRVFF[FSFEBEKVTUNFOUIBOEMF
and push head support down.
tCHECK to make sure it is securely snapped
into one of the 4 height positions by pulling
up on head support.
tFOR PROPER FIT: The shoulder belt
guides should be even with or just above
the shoulders C.
A
B
C