Graco SnugRide Click Connect 30 User Manual

17
• Combination Lap/Shoulder Belt
with Locking Latch Plate
• Lap Belts with Automatic
Locking Retractor (ALR)
The automatic locking
retractor will not permit the
lap belt to lengthen once it is
buckled. Tighten the belt by
feeding the belt back into the
retractor while pushing down
hard on the infant restraint.
Once it is buckled, this type of
belt has a latch plate that will not
allow the lap portion of the belt to
loosen. Belt is tightened by pulling
hard on the shoulder portion of the
vehicle belt while pushing down
hard on the infant restraint.

Graco SnugRide Click Connect 30 Specifications

General

Weight Capacity	4-30 lbs
Height Capacity	Up to 30 inches
Harness Type	5-point harness
Base Included	Yes
Side Impact Protection	Yes
Infant Head Support	Yes
Category	Infant Car Seat
Car Seat Weight	7.5 lbs
Expiration	7 years from manufacture date
Recline Positions	Multiple
Stroller Compatible	Yes
Travel System Compatible	Yes
Warranty	1 year limited warranty
Installation Type	LATCH, Seat Belt
Installation Method	LATCH or Vehicle Seat Belt